Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 30)

6.4.2. Offset mode
The second entry is the offset mode with the menu name 'Off'.
In this mode the start phase of the oscillators can be adjusted with the volume parameter. The
frequency parameter has no effect.
If the volume is set to zero, the oscillators will be reset to a zero crossing of the waveform on each
trigger. If the volume parameter is set to its maximum value, the waveform will start on the position
with the highest amplitude, generating a loud pop. This results in the volume parameter controlling
the intensity of the initial pop.
6.4.3. Sample mode
A short transient sample is mixed to the sound. They are short (~50ms) 8-bit ROM samples that are
played as a one shot whenever the sound is triggered. Different samples can be selected.
6.4.4. Parameters
The parameters of the transient generator include the PCM waveform to use, the playback
frequency and the volume. The ROM samples can't be changed by the user on the fly. They are hard
coded into the firmware.
A list of the included samples:
Displayed
name
Name Description
Snp Snappy Mode
Off Offset Mode
Transient Samples
Clk Click
Ck2 Click 2
Tik tick Some kind of tick sound i
Kik Acoustic kick An acoustic kick drum ii
Rim Rim shot A rim shot sound iii
Drp Drip A dripping sound made by a human being. iv
Hat Hat Sampled off of Zildjian A-Custom Hi-Hats v
Clp Clap 808 clap vi
Ki2 Kick 2 A kick sample
Sna Snare A snare sample
Tom Tom A tom sample (sort of)
Sp2 snap A finger snap
6.5. Sample Rate Reduction
The sample rate reducer can gradually reduce the sample rate from 44kHz to zero. Reducing the
sample rate will give more of a lo-fi sound. The more it is reduced, the more odd harmonics will be
LXR Owners Manual - 30 -