Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 13)

Displayed
name
Name Description
wav Transient wave shape Selects the transient sample to play.
vol Transient volume Volume of the transient sample.
frq Transient frequency Frequency of the transient sample.
4.4.6. Filter Page (FIL)
All parameters of the filter are on this page. The available parameters are frequency, resonance, type
and drive.
Displayed
name
Name Description
frq Filter frequency Changes the cut off frequency of the filter.
res Filter resonance Adjusts the filter resonance.
typ Filter type Selects the filter characteristic.
drv Filter drive Increases the input gain of the filter .
4.4.7. Mixer Page (Mix)
The mixer page provides access to volume, panning, routing, voice FX and sequencer track length.
Displayed
name
Name Description
vol Voice volume Adjusts the volume of the voice.
pan Voice panning Voice panning. Only active if output is set to a stereo
channel.
sr Sample rate Sample rate decimation
drv Drive Soft clipping amount
out Output Selects the hardware audio out for this voice. The
voice can either be routed to one of the 2 stereo
channels or use the 4 outputs as individual mono
channels or the FX bus.
5. Menu
There are different menus for different tasks. Voice editing, performance or modulation and FX
routing. The main modes are accessible with the 6
MENU buttons.
5.1. EDIT mode
The voice EDIT mode is used to modify the sound parameters for each voice.
LXR Owners Manual - 13 -