Erica Synths Black Dual ASR EG Eurorack Module - Manual

BLACK
DUAL ASR EG
THANK YOU FOR PURCHASING
ERICA SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end, unique functionality and superior quality
modules. Only the best, highest quality components are used, all inputs and outputs
are protected against undesired overvoltage. When designing Black Series, put
design and usability superior. Big knobs are assigned to functions that make
difference in sound. Erica Black series consist of range of modules that are needed
to put together entire synth. Enjoy!
The Erica Synths Black Dual ASR EG is a versatile, full analogue voltage controlled
looping envelope generator and low frequency oscillator with manually and
voltage controlled shape and rate, designed for use in advanced modular systems.
It has two identical parts, each featuring all typical envelope generator controls and
bonus features – the end of the cycle output and bi-polar LFO output. When in loop
mode the shortest attack and decay settings turn the module into voltage controlled
drone oscillator with adjustable waveform (it will not track 1V/oct, though).
FEATURES:
Dual voltage controlled envelope generator and LFO
Manual and voltage control over Attack and Decay/Release
Adjustable LFO shape
Manual gate button
Loop/Free running switch
End of the cycle output
Bipolar LFO output
A jumper for the EG/LFO time configuration
ATTACK 1; ATTACK 2
These are manual Attack time controls. The incoming
CV is added to the knob position. For the LFO
operation this knob will control a slope of the rising
edge of the LFO waveform.
DECAY 1; DECAY 2
These are manual Decay/Release time controls. The
incoming CV is added to the knob position. For the LFO
operation this knob will control a slope of the falling
edge of the LFO waveform.
MANUAL 1; MANUAL 2
These are the manual gate buttons. A built-in LED
indicates the envelope state.
LOOP 1; LOOP 2
These are Loop/Gated EG switches. An incoming Gate
will reset the loop to the zero, so looping EG in
combination with an incoming gate will make more
advances envelopes. For LFO operation the switch
should be in Loop position.
A1 CV; A2 CV
These are the Attack/rising edge CV inputs.
D1 CV; D2 CV
These are the Decay/falling edge CV inputs.
GATE1; GATE2
These are the Trigger/Gate inputs. When a trigger is
applied, the module will output the AD envelope, when
a gate is applied, it will output ASR envelope. The gate of
the first EG is normalled to the gate input of the second
EG, so they start simultaneously – very useful feature, if
you wish to control a VCA and a VCF from a single gate.
EOC1; EOC2
These are the End for Cycle outputs – they output high
signal, when the envelope reaches end position. Use this
output to trigger other events in your system or retrigger
the second envelope generator for advanced
multi-stage envelopes. The LED indicates, when the
output is +5V.
EG1; EG2
These are the envelope outputs.
BP1; BP2
These are the bi-polar LFO outputs.
SPECS:
Attack time 0-1” (3”)
Decay/Release time 0,01” – 3” (9”)
EG level 0 – 10V
Bi-polar LFO level -5V - +5V
EOC trigger level +5V
CV level (full span) -5V - +5V
Power consumption +45mA, -39mA
Module width 10HP
Module depth 35mm
BLACK DUAL ASR EG
BP2 EG2 BP1 EG1
EOC2 GATE2 EOC1 GATE1
D2 CV A2 CV D1 CV A1 CV
MANUAL1 MANUAL2 LOOP1
FREE1
LOOP2
FREE2
DECAY 1 DECAY 2
ATTACK 1 ATTACK 2