Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 17)

played note. You just have to set the LFO frequency so that one cycle of the LFO
is slightly longer than the amplitude envelope, so it won't start a new cycle while
the note is still playing. Great for filter decay envelopes on juice synth bass
souds!
5.4. FX Mode
The LXR provides a digital FX processor. Only 1 effect can be used at a time. Currently there are 4
FX available: Drive, Ringmodulator, Compressor and Delay.
You can use the FX processor, by setting the output routing on the mixer page to “FX”. So the voice
will be routed to the FX bus before going to the output. So you can select which of the voices will
be processed by the FX processor.
5.4.1. Menu location
The FX menu is accessed by pushing SHIFT + FX
5.4.2. Drive
The drive FX is a collection of different distortion algorithms. It offers 3 different types of
saturation. In contrast to the drive parameter of the single voice filter and mixer pages, this FX
processes all signals in a single distortion unit. This leads to interesting inter modulation between
the input signals.
Drive Types
The 4 th parameter “type” selects the drive algorithm to use.
• Tub – Adds tube Saturation
• Fld – A wavefolder distortion
• Clp – A rodent inspired hardclip pedal emulation
Parameters
Displayed
name
Name Description
typ FX Type Drive
out Output routing Selects the Audio output the FX signal is mixed to.
d/w Dry / Wet ratio Mixing ratio between the original and the FX signal.
LXR Owners Manual - 17 -