Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 21)

• To load the selected kit push the encoder.
• The kit sound will play immediately
• unsaved changes to the previous kit are lost
Kit Saving
• Press SHIFT + LOAD/SAVE
• Select the preset number you want to save your kit to.
• Push the encoder
• You will be asked : ”Edit Name? [y/N]”
• if you don’t want to change the name, push the encoder and you kit is saved.
• if you want to change the name, use the encoder to navigate to [Y/n] and push it.
• Navigate to the letters of the name.
• You can change the letters if you push the encoder and turn it or refer to the quick naming
scheme
• If you are happy with the name, navigate the cursor to the 'ok' button and push the encoder
down to save the kit.
5.6. Global settings menu
The settings menu contains the global configuration of the synth. Settings will be saved as soon as
you exit the menu.
5.6.1. Menu location
• Press the SHIFT + LOAD/SAVE buttons
• The SHIFT + LOAD/SAVE button starts to flash to indicate that the global settings menu
is active.
5.6.2. Menu options
Displayed
name
Name Description
ssv Screensaver Turn the screensaver on or off
cv Global CV Save Save the CV routing globally or on a per kit basis
5.6.3. Screensaver
The display provided with the kit is an OLED display. To expand the lifetime of the OLED display
and to avoid burn in, the firmware provides a screensaver for the display. After no control is
LXR Owners Manual - 21 -