Erica Synths LXR Eurorack Drum Module (28 HP) - Manual (Page 6)

1) IO Jacks
In the first row, we have 7 trigger in jacks (5V) to trigger the voices and the 4 audio outs.
The second row has 6 accent inputs (5V) and 5 freely assignable CV (-5V to 5V) inputs.
2) MENU Buttons
Select the operating mode of the module
3) Display
The display is used to show parameter values from the selected menu page.
4) Encoder
Navigate through the menu.
5) Endless Potentiometers
The 4 pots are used to edit the values shown in the display above.
6) SELECT buttons
Switch voices and select sound parameter sections.
7) DRUM Button
Used to switch the active voice together with the select buttons.
2.1. Menu Navigation
The upper row of the display will show the short name of the parameter. The bottom row shows the
value of the parameter. You can change the value using one of the 4 knobs below the display.
frq RES typ drv >
32 120 LP 0
• The encoder selects a menu parameter. Capital letters highlight the selected parameter. In
our example picture above, the 'RES' parameter is selected.
• If there are more than 4 entries in the current menu, the next page will be shown if you scroll
over the screen boundary. A '>', '*' or '<' sign in the right upper corner indicates if there is
more than 1 page available and which page is active. The pages of a menu can be toggled by
pressing the
MENU button again.
If you push the encoder the detail page is shown
Filter
Resonance
120
LXR Owners Manual - 6 -