Loading and saving, Display description, Menu navigation – Erica Synths LXR Eurorack Drum Module (28 HP) User Manual
Page 20: Quick naming scheme, Kit loading
5.5. Loading and saving
When the LXR is turned on, the last used kit is automatically loaded from the SD card to the
machines memory.
After this initial load, all changes made are temporary. If another kit is selected, all changes to the
current kit are lost.
To make these changes permanent, you have to save the kit to commit them to the SD card.
The
SAVE/LOAD
button will bring up the kit load menu. Press
LOAD/SAVE
again, to bring up
the save menu.
5.5.1. Display description
Load: Kit
[ 1] Name
•
The first row of the display gives information about the active mode (load or save)
•
The second row chooses the active preset no. and displays the name of the selected preset.
•
You confirm the selection by pushing the encoder button to load/save a kit.
5.5.2. Menu navigation
•
Use the encoder to navigate trough the menu
•
push the encoder to confirm your selection
Quick naming scheme
To speed up the name entry on the save page you can also use the knobs below the display. If the
cursor is in the name area the knobs have the following functions:
•
The first knob selects the cursor position
•
The second knob switches between upper and lower case letters.
•
The third knob scrolls through the available default ASCII characters.
Kit Loading
•
Press
LOAD/SAVE
•
Select a new kit with the encoder.
LXR Owners Manual
- 20 -