Sony Underwater Housing for Select RX100-Series Cameras - Manual (Page 57)

57
RF power status : Select whether to display the
transmitter’s transmitted power.
RF remote status : Select whether to display the
transmitter’s wireless remote control condition.
Word sync status : Select whether to display the sync
status of the signal output from the receiver’s DIGITAL
OUT connector.
Auto Freq change status : Sets whether to display the
status of the AUTO FREQ CHANGE setting of the
receiver.
This function is available only on the DWR-R03D version
1.20 or later.
Display example for the [Device List] window
• Both Label and Tx Name displayed
• Only Tx Name displayed (factory default setting)
• Only Label displayed
Display example for the [Property] window
• Label displayed
• Label not displayed (factory default setting)
Display example for the [RF Chart Grapher] tab
• Both Label and Tx Name displayed
• Only Tx Name displayed (factory default setting)
• Only Label displayed
Display example for the status viewer
• All items displayed
• All items except Label displayed
• All items except Tx Name displayed
Display example for the [Simple Status Viewer]
tab
• All items displayed
Note