Cont. bracket – Sony Airpeak S1 Professional Drone User Manual

Page 91

Digital Camera

ZV-1

Cont. Bracket

Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. You can select
an image that suits your purpose after recording.

Menu item details

For example, the camera shoots a total of three images continuously with an exposure value shifted by plus or minus 0.3
EV when [Cont. Bracket: 0.3EV 3 Image] is selected.

Note

The last shot is shown on the auto review.

When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the ISO value. If a setting other
than [ISO AUTO] is selected, the exposure is changed by adjusting the shutter speed.

When the exposure is compensated, the exposure is shifted based on the compensated value.

Bracket shooting is unavailable in the following shooting modes:

[Intelligent Auto]
[Scene Selection]
[Sweep Panorama]

When the flash is used, the product performs flash bracket shooting, which shifts the amount of flash light even if [Cont. Bracket]
is selected. Press the shutter button for each image.

Related Topic

Bracket Settings

Indicator during bracket shooting

Press

(Drive Mode) of the control wheel → [Cont. Bracket].

You can also set the drive mode by selecting MENU→

(Camera Settings1) → [Drive Mode].

Select the desired mode using the right/left side of the control wheel.

Adjust the focus and shoot the image.

The base exposure is set at the first shot.
Keep pressing and holding the shutter button until bracket shooting is finished.