Supplying power from a wall outlet (wall socket), Help guide – Sony Airpeak S1 Professional Drone User Manual

Page 46

Digital Camera

ZV-1

Supplying power from a wall outlet (wall socket)

Use an AC adaptor, etc. to shoot and play back images while power is supplied from a wall outlet (wall socket). This
conserves the camera's battery power.

Note

When you use an AC adaptor, use one with a rated output of 1.5 A or higher.

The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera.

If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon that shows that
powering via USB is in progress (

) is displayed on the monitor.

Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the
camera will be turned off.

Do not remove the battery pack while the access lamp is lit. The data in the memory card may be damaged.

As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC adaptor, etc.

Under certain conditions, power may be supplied from the battery pack supplementarily even if you are using the AC adaptor, etc.

Do not remove the Micro USB cable while power is supplied from a wall outlet (wall socket). Before you remove the Micro USB
cable, turn off the camera. The area around the terminal may become hot. Be careful when handling it.

Depending on the camera and battery temperature, the continuous recording time may be shortened while power is supplied from
a wall outlet (wall socket).

When using a mobile charger as a power source, confirm that it is fully charged before use. Also, be careful of the remaining
power on the mobile charger during use.

Insert the battery pack into the camera.

Connect the camera to the wall outlet (wall socket) with a micro USB cable (supplied) and an AC adaptor,
etc.