Metering mode – Sony Airpeak S1 Professional Drone User Manual
Page 137
Digital Camera
ZV-1
Metering Mode
Selects the metering mode that sets which part of the screen to measure for determining the exposure.
Menu item details
Multi:
Measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the
entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the central area of the screen (Center-
weighted metering).
Spot:
Measures only inside the metering circle. This mode is suitable for measuring light at the center of the screen. The size
of the metering circle can be selected from [Spot: Standard] and [Spot: Large].
Entire Screen Avg.:
Measures the average brightness of the entire screen. The exposure will be stable even if the composition or the position
of the subject changes.
Highlight:
Measures the brightness while emphasizing the highlighted area on the screen. This mode is suitable for shooting the
subject while avoiding overexposure.
Hint
When [Multi] is selected and [Face Priority in Multi Metering] is set to [On], the camera measures brightness based on detected
faces.
When [Metering Mode] is set to [Highlight] and the [D-Range Optimizer] or [Auto HDR] function is activated, the brightness and
the contrast will be corrected automatically by dividing the image into small areas and analyzing the contrast of light and shadow.
Make settings based on the shooting circumstances.
Note
[Metering Mode] is locked to [Multi] in the following shooting modes:
[Intelligent Auto]
[Scene Selection]
[
Intelligent Auto]
Other zoom functions than the optical zoom
In [Highlight] mode, the subject may be dark if a brighter part exists on the screen.
Related Topic
Face Priority in Multi Metering
MENU →
(Camera Settings1) → [Metering Mode] → desired setting.
1
137