Charging by connecting to a computer – Sony Airpeak S1 Professional Drone User Manual

Page 43

Digital Camera

ZV-1

Charging by connecting to a computer

The battery pack can be charged by connecting the camera to a computer using a micro USB cable.

Note

If the product is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do
not leave the product connected to a laptop computer for an extended period of time.

Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.

Proper operation cannot be guaranteed on all types of computers.

Charging cannot be guaranteed with a custom-built computer, modified computer, or a computer connected through a USB hub.

The camera may not operate correctly when other USB devices are used at the same time.

Related Topic

Notes on the battery pack

Notes on charging the battery pack

Turn off the product, and connect to the USB terminal of the computer.

Charge lamp on the camera (orange)

Lit: Charging
Off: Charging finished
Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature
range

Charging time (Full charge): The charging time is approximately 285 min. (when charging by connecting to a
computer).
The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F).
Charging may take longer depending on conditions of use and circumstances.
The charge lamp turns off when charging is completed.
If the charge lamp lights up and then immediately turns off, the battery pack is fully charged.