Sony Airpeak S1 Professional Drone User Manual
Page 181
Note
The sound of the lens and the product in operation may be recorded during movie recording. The sound of the zoom is
particularly likely to be recorded during movie recording if [Zoom Speed] is set to [Fast].
You can set the camera not to record sound by selecting MENU →
(Camera Settings2) → [Audio Recording] → [Off].
The recording lamp lights up when recording starts.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
If
(Overheating warning icon) appears, the temperature of the camera has risen. Turn the power off and cool the camera and
wait until the camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When movie recording is finished, you
can record another movie by pressing the MOVIE button again. Recording may stop to protect the product, depending on the
temperature of the product or the battery.
When the shooting mode is set to
(Movie),
(
Intelligent Auto) or
(High Frame Rate), or during movie
shooting, you cannot select [Tracking] for [Focus Area].
In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set automatically and cannot be
changed. For that reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not be
recorded smoothly. By changing the exposure mode and adjusting the aperture value and the shutter speed, the motion of the
subject can be recorded smoothly.
In movie shooting mode, ISO sensitivity can be selected from ISO 125 to ISO 12800. If the ISO value is set to a value smaller
than ISO 125, the setting is automatically switched to ISO 125. When you finish recording the movie, the ISO value returns to the
original setting.
When ISO sensitivity is set to [Multi Frame NR], [ISO AUTO] will be set temporarily.
In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set
temporarily.
Soft Focus
HDR Painting
Rich-tone Mono.
Miniature
Watercolor
Illustration
The Face Detection function / Eye Detection function is not available in the following situations.
[
File Format] is set to [XAVC S 4K], [
Record Setting] is set to [30p 100M]/[25p 100M] or [30p 60M]/[25p 60M], and [
4K Output Select] is set to [Memory Card+HDMI]
[
File Format] is set to [XAVC S HD], and [
Record Setting] is set to [120p 100M]/[100p 100M] or [120p 60M]/[100p
60M]
If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in
the image may be recorded as a black area.
Use PlayMemories Home when importing XAVC S movies and AVCHD movies to a computer.
Related Topic
Recordable movie times
Assigning frequently used functions to buttons (Custom Key)
5-016-934-11(1) Copyright 2020 Sony Corporation
181