Sony BRAVIA FW-98BZ50L 98" UHD 4K HDR Commercial Monitor - Manual (Page 31)

31
Re
cor
d
in
g
z Tips
• For details about changing the screen display during recording, see page 68.
• For details about screen display during recording, see page 17.
• The recording lamps can be set to stay off ([REC LAMP], p. 113).
Insert memory cards each in both slots A and B so the camcorder switches memory card A (or
B) just before the remaining space on the other one runs out, and continues recording on the
next memory card automatically.
Do the following setting before recording.
Press MENU
t select (REC/OUT SET) t [REC SET] t [SIMUL/RELAY REC] t
[RELAY REC] with the V / v / B / b /SET button.
b Notes
• Do not eject the memory card that is currently being used for recording. When replacing a memory card
while recording, replace only the one in the slot whose access lamp is off.
• Even if you press the SLOT SEL button, while recording movies, you cannot switch the slot currently
being used.
• When the remaining recording time of the memory card being used is less than 1 minute and the other slot
has a recordable memory card inserted, [ ] or [ ] appears on the camcorder screen.
The indicator turns off when the memory card is switched.
• If you start recording on a memory card with the remaining recording time of less than 1 minute, the
camcorder may not be able to relay-record. To relay-record without failing, make sure that the memory
card has more than 1 minute when you start recording.
• Seamless playback of relay-recorded movies with this camcorder is not possible.
• You can combine relay-recorded movies using application software (p. 20).
• The maximum recording time using relay recording is 6 hours for XAVC/MPEG HD and 13 hours for
AVCHD. Recording stops automatically when the maximum recording time elapses.
Continuous recording on the memory cards (Relay Rec)
REC start
Small space
Exchange the recordable memory card
Small space
REC end
REC: Recording
Continued ,