Sony BRAVIA FW-98BZ50L 98" UHD 4K HDR Commercial Monitor - Manual (Page 23)

23
Ge
tt
in
g
S
ta
rte
d
Step 4: Turning on the camcorder and setting
the date and time
Turn the ON/STANDBY switch to ON
(
❙
).
When you use your camcorder for the first
time, the [CLOCK SET] screen appears.
To turn off the power
Turn the ON/STANDBY switch to
STANDBY (
1 ).
b Note
• If a warning message is displayed, follow the
instructions.
Set the date and time when you use your
camcorder for the first time.
z Tip
• If you do not use your camcorder for about 3
months , the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again (p. 140).
When you set the date and time again, press
the MENU button, and select
(OTHERS) t [CLOCK SET].
1
Select your area using the V / v / B /
b /SET button, then press the
button.
Turning on the camcorder Setting the date and time
MENU button
V / v / B / b /SET buttons
Continued ,