Emerson Liebert UPStation GXT2U - Manual (Page 25)

Communications
21
8.4 UPS Intelligent Communications
The Liebert UPStation GXT2U is equipped with a Liebert IntelliSlot ®
port to provide advanced communication and monitoring options.
Liebert’s MultiLink software continually monitors the UPS and can
shut down your computer or server in the event of an extended power
failure.
Liebert MultiLink can also be configured for use without the serial
cable when the Liebert IntelliSlot SNMP/Web card is installed in the
UPS. Additionally, Liebert MultiLink can be configured to coordinate
shutdown across the network with other computers running Liebert
MultiLink when you purchase a Liebert MultiLink License Kit. For
more information about the Liebert IntelliSlot SNMP/Web Card and
Liebert MultiLink License Kits, visit our Web site (www.liebert.com)
or contact your local dealer or Liebert representative.
Several option cards are available for use in the Liebert IntelliSlot
port of the Liebert UPStation GXT2U. The Liebert IntelliSlot SNMP/
Web Card provides SNMP and Web-based monitoring and control of
the UPS across the network.
The Liebert IntelliSlot MultiPort 4 Card allows you to install Liebert
MultiLink software on four computers and coordinate shutdown in the
event of a power failure.
The Liebert IntelliSlot Relay Card provides dry contact relay outputs
for custom-wired applications and delivers support for built-in shut-
down for AS/400 systems.
!
CAUTION
To maintain safety (SELV) barriers and for electromagnetic
compatibility, signal cables should be segregated and run
separate from all other power cables, where applicable.