Sharp MX-6070N - Manual (Page 32)

32
Related topics
• "Software CD-ROM" included in this
machine P.6
• Operating environment of the computer
P.8
• Conditions of software use P.10
• Windows/Display the software selection
screen (common procedure) P.12
Troubleshooting
• Cannot install P.41
• Problem with Windows P.42
• How to setup this machine P.45
Install Printer Status Monitor
Status monitor cannot be used when the IPP function is used.
1. Display the "Software selection" screen
Refer to " Windows/Display the software selection screen (common procedure)
P.12 " on how to display the "Software selection" screen.
2. Click the [Utility Software...] button
3. Click the [Printer Status Monitor] button
Click the [Display Readme] button ( ) before installation and make sure that
you confirm the details of the software.
4. Follow the instructions on the screen and proceed with
installation
Confirm the content of the screen, and click the [Next] button.
The install complete screen is displayed.
5. Click the [Finish] button
Select [Register at startup] and click the [Finish] button. The printer status
monitor starts up automatically when the computer boots.
6. Close the "Software selection" screen
Click [Close].
Now the install procedure is complete.
After the install procedure is complete, a message prompting restart may be
displayed. In this case, click the [Yes] button and restart the computer.
• Refer to help for operation.
• Select in the following order: Windows [Start] button
→ [All programs] →
[SHARP printer status monitor] → [Help].
• In Windows 8.1/Server 2012, right-click in the startup window (or
swipe upward from the bottom edge), then select [Taskbar] →
[All Applications] → [Help] in the SHARP Printer Status Monitor menu.
STEP 1-6/6  Windows/Display the software selection screen (common procedure) Windows/Utility Software installation Install status monitor