Sharp MX-6070N User Manual

Page 30

Troubleshooting

Windows/Display the software selection screen (common procedure)

Installing others

Changing ports

7. Select [Custom], and click the [Next] button

The "Port setup" screen is displayed.

8. Setup the port

Choose either of the below and click the [OK] button.

• [Protocol] Raw / [Port number] 9100
• [Protocol] LPR / [Queue Name] lp

9. Click the [Next] button of the step 4 screen

10. Click the [Finish] button

11. Click the [Close] button on the step 1 screen

• When using a port created by an OS standard "Standard TCP/IP Port",

click the [Configure Port...] button on the step 3 screen and set the
[SNMP Status Enabled] checkbox to

. If it is set to

. the printer

may not function correctly.

STEP 7-11/11

