FujiFilm X-T10 User Manual

Page 88

Focus Mode

R The camera can show focus distance in meters or feet. Use the A SCREEN SET-UP > FOCUS SCALE UNITS

option in the setup menu (

P 109) to choose the units used.

R If ON is selected for G AUTOFOCUS SETTING > PRE-AF in the shooting menu (P 93), focus will be adjusted

continuously in modes S and C even when the shutter button is not pressed.

■ The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when
the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing
and are displayed continuously in mode C.

j is displayed in manual focus mode.

4000 5.6

400

Focus indicator

Checking Focus

To zoom in on the current focus area (

P 75) for precise focus, press

the center of the rear command dial. Press again to cancel zoom.
In manual focus mode, zoom can be adjusted by rotating the rear
command dial when STANDARD or FOCUS PEAK HIGHLIGHT is
selected for

c MF ASSIST, while if ON is selected for A SCREEN

SET-UP > FOCUS CHECK, the camera will automatically zoom in on
the selected focus area when the focus ring is rotated. Focus zoom is not available in focus mode C or when
G AUTOFOCUS SETTING > PRE-AF is on or an option other than r SINGLE POINT is selected for G AUTO-
FOCUS SETTING > AF MODE.