FujiFilm X-T10 - Manual (Page 114)

98
Using the Menus: Shooting Mode
k k BKT/Adv. SETTING BKT/Adv. SETTING
Choose the bracketing option used when the DRIVE dial is rotated to BKT1 or BKT2 ( P 45, 64) or the fi lter used when the dial is
rotated to Adv.1 or Adv.2 ( P 45, 67).
L L IS MODE IS MODE
Choose from the following image stabilization options:
Option Option Description Description
L L CONTINUOUS + MOTION CONTINUOUS + MOTION Image stabilization on. If + MOTION is selected, the camera will adjust shutter speed to reduce
motion blur when a moving objects are detected. l l CONTINUOUS CONTINUOUS
M M SHOOTING + MOTION SHOOTING + MOTION As above, except that image stabilization is performed only when the shutter button is pressed
halfway or the shutter is released.
m m SHOOTING ONLY SHOOTING ONLY
OFF OFF Image stabilization off . Choose this option when using a tripod.
R + MOTION has no eff ect when sensitivity is set to a fi xed value, and may also be unavailable at some other combinations of
settings. The eff ect may vary with lighting conditions and the speed at which the object is moving.
R IS mode is available only when lens that supports image stabilization is attached.
r r WIRELESS COMMUNICATION WIRELESS COMMUNICATION
Connect to a smartphone or tablet over a wireless network ( P 118).
R For more information, visit http://fujifilm-dsc.com/wifi/.
e e APERTURE SETTING APERTURE SETTING
Choose the method used to adjust aperture when using lenses with no aperture rings.
• AUTO +
o MANUAL: Rotate the rear command dial to choose the aperture. Rotate past minimum aperture to choose A (auto).
• AUTO: Aperture is selected automatically; camera functions in exposure mode P (program AE) or S (shutter-priority AE).
• MANUAL: Rotate the rear command dial to choose the aperture; camera functions in exposure mode A (aperture-priority AE)
or M (manual).
R Aperture can not be adjusted while the view through the camera lens is zoomed in.