FujiFilm X-T10 - Manual (Page 67)

51
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Choosing an Exposure Mode Choosing an Exposure Mode
When the auto mode selector lever is rotated to z, you can choose from the following exposure
modes: program AE (P), shutter-priority AE (S), aperture-priority AE (A), and manual (M).
Program AE (P) Program AE (P)
To allow the camera to adjust both shutter speed and aperture
for optimal exposure, rotate the auto mode selector lever to
z
and set shutter speed and aperture to A. P will appear in the
display.
Q If the subject is outside the metering range of the camera, the shutter
speed and aperture displays will show “– – –”.
Aperture mode switch
P 4000 5.6 400
Program Shift
Program Shift
If desired, you can rotate the front command dial to select other combina-
tions of shutter speed and aperture without altering exposure (program shift).
The new values for shutter speed and aperture are shown in yellow. Program
shift is not available if the attached fl ash supports TTL auto, or if an auto option
is selected for
U DYNAMIC RANGE in the shooting menu (P 94). To cancel
program shift, turn the camera off .
P 4000 5.6 400
Shutter speed
Aperture