FujiFilm X-T10 User Manual

Page 36

Inserting the Battery and a Memory Card

Removing the Battery and Memory Card

Before removing the battery or memory card, turn
the camera off and open the battery-chamber cover.

To remove the battery, press the
battery latch to the side, and
slide the battery out of the cam-
era as shown.

Battery latch

To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could be
ejected too quickly. Use your
fi nger to hold it and gently re-
lease the card.

Q Batteries

Batteries

• Remove dirt from the battery terminals with a clean,

dry cloth. Failure to observe this precaution could
prevent the battery from charging.

• Do not affi

x stickers or other objects to the battery.

Failure to observe this precaution could make it im-
possible to remove the battery from the camera.

• Do not short the battery terminals. The battery could

overheat.

• Read the cautions in “The Battery and Power Supply”

(

P iv).

• Use only battery chargers designated for use with the

battery. Failure to observe this precaution could re-
sult in product malfunction.

• Do not remove the labels from the battery or attempt

to split or peel the outer casing.

• The battery gradually loses its charge when not in

use. Charge the battery one or two days before use.