FujiFilm X-T10 - Manual (Page 76)

60
Sensitivity Sensitivity
“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between 200 and 6400, or
select L (100), H (12800), H (25600), or H (51200) for special situations. Higher values can be used to
reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in
bright light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly
at H (51200), while choosing L (100) reduces dynamic range. Values of from ISO 200 to ISO 6400 are
recommended in most situations. If AUTO1, AUTO2, or AUTO3 is selected, the camera will adjust
sensitivity automatically in response to shooting conditions.
1 Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or
down to highlight N ISO and press MENU/OK.
2 Press the selector up or down to highlight the desired option and
press MENU/OK to select.
P 4000 5.6 400
P SHOOTING MENU
3:2
ISO 200
F
AUTO
PROGRAM AE
O
800
640
500
400
320
1000
1250
R Sensitivity is not reset when the camera is turned off .
R L (100) is reset to ISO 200 and H (12800), H (25600), and H (51200) are reset to ISO 6400 when RAW,
FINE+RAW, or NORMAL+RAW is selected for image quality ( P 94). For more information on the settings avail-
able with L (100), H (12800), H (25600), and H (51200), see page 152.