Canon EOS M10 - Manual (Page 47)

47
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Changing the Image Display Period after Shots
Still Images Movies
● Press the [ ] button, choose
[Image review] on the [ 1] tab, and then
choose the desired option.
● To restore the original setting, repeat this
process but choose [2 sec.].
2 sec., 4 sec.,
8 sec.
Displays images for the specified time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information.
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(= 32).
Deactivating the Red-Eye Reduction Lamp
Still Images Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Access the [Flash Control] screen.
● Press the [ ] button, choose [Flash
Control] on the [ 3] tab, and then press
the [ ] button (= 32).
2
Configure the setting.
● Choose [Red-eye reduc.], and then
choose [Off] (= 32).
● To restore the original setting, repeat this
process but choose [On].