Registering other web services – Canon EOS M10 User Manual
Page 123
123
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
●
You can also change the camera nickname on the screen in
step 3 (= 137).
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera first (= 121).
1
Access the Web service settings
screen.
●
Follow step 1 in “Registering CANON
iMAGE GATEWAY” (= 121) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2
Configure the Web service you want
to use.
●
Follow the instructions displayed on the
smartphone or computer to set up the
Web service.
7
Enter the authentication code.
●
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
●
A six-digit confirmation number is
displayed.
8
Check the confirmation number and
complete the setup process.
●
Check the confirmation number on the
second screen in step 6 (displayed after
you pressed the [ ][ ] buttons to choose
[OK], and then pressed the [ ] button).
●
Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●
Complete the setup process on the
smartphone or computer.
●
CANON iMAGE GATEWAY and [ ]
(= 131) are now added as destinations,
and the [
] icon changes to [
].
●
The Web service settings screen
is displayed on the smartphone or
computer.
To register other Web services, follow