Nikon D500 - Manual (Page 144)

144 Menu Guide
Adjust settings for optional WR-R10 wireless remote controllers
and for optional radio-controlled flash units that support
Advanced Wireless Lighting.
❚❚ LED Lamp
Enable or disable the status LEDs on a WR-R10 wireless remote
controller mounted on the camera. For more information, see
the documentation supplied with the wireless remote controller.
❚❚ Link Mode
Choose a link mode for WR-R10 wireless remote controllers
mounted on other cameras or radio-controlled flash units that
support Advanced Wireless lighting. Be sure that the same
mode is selected for the other devices.
Regardless of the option selected for Link mode, signals from
paired wireless remote controllers will always be received by the
WR-R10. Users of the WR-1 remote controller will need to select
pairing as the WR-1 link mode.
Wireless Remote (WR) Options
G button
➜ B setup menu
Option Description
Pairing
To pair the camera with a WR-R10, mount the WR-R10 on the
camera and press the pairing button.
PIN
Connect by entering the device
PIN code. Press
4 or 2 to
highlight digits and press 1 or 3
to change, then press J to enter
and display the selected PIN.