Nikon D5 - Manual (Page 97)

97
Aperture
setting
If Sub-command dial is selected, aperture can only be
adjusted with the sub-command dial (or with the main
command dial if On is selected for Change main/sub >
Exposure setting). If Aperture ring is selected, aperture can
only be adjusted with the lens aperture ring and the camera
aperture display will show aperture in increments of 1 EV
(aperture for type G and E lenses is still set using the sub-
command dial). Note that regardless of the setting chosen, the
aperture ring must be used to adjust aperture when a non-CPU
lens is attached.
Menus
and
playback
If Off is selected, the multi selector is used to choose the picture
displayed during full-frame playback, highlight thumbnails,
and navigate menus. If On or On (image review excluded) is
selected, the main command dial can be used to choose the
picture displayed during full-frame playback, move the cursor
left or right during thumbnail playback, and move the menu
highlight bar up or down. The sub-command dial is used in
full-frame playback to skip forward or back according to the
option selected for Sub-dial frame advance and in thumbnail
playback to page up or down. While menus are displayed,
rotating the sub-command dial right displays the sub-menu for
the selected option, while rotating it left displays the previous
menu. To make a selection, press
2, the center of the multi
selector, or J. Select On (image review excluded) to prevent
the command dials from being used for playback during image
review.
Sub-dial
frame
advance
When On or On (image review excluded) is selected for
Menus and playback, the sub-command dial can be rotated
during full-frame playback to select a folder, to skip forward or
back 10 or 50 frames at a time, or to skip to the next or previous
protected image, photo, or movie.
Option Description