ProSoft Technology PTQ-104C - Manual (Page 27)

49TPTQ-104C ♦ 48TQuantum Platform Configuring the Processor with Unity Pro
47TIEC 60870-5-104 Client
12TUser Manual
2.4 Connecting a PC to the Processor
The next step is to connect to the processor so the project file can be
downloaded. The processor uses this project file to communicate over the
backplane to modules identified in the project file.
Note: If a connection between the PC to the processor has not been established, verify the port
drivers are installed and are available to Unity Pro.
Verifying the address and driver settings in Unity Pro
1 Open the PLC menu, and choose S TANDARD M ODE . This action turns off the
PLC Simulator. It allows the user to communicate directly with the Quantum
or Unity hardware.
2 Open the PLC menu, and choose S ET ADDRESS ... This action opens the Set
Address dialog box. Open the M EDIA dropdown list and choose the
connection type (TCPIP or USB).
ProSoft Technology, Inc. Page 27 of 136
March 4, 2013