ProSoft Technology PTQ-104C - Manual (Page 118)

Reference 49TPTQ-104C ♦ 48TQuantum Platform
12TUser Manual 47TIEC 60870-5-104 Client
Word Offset
in Block Data Field(s) Description
2 State State of Client Socket:
-255 = Idle until processor in run
-1 = Ready for socket open
0 = Waiting for socket establish
1 = Obsolete (not used)
2 = Read and write data to socket (process data)
3 = Need more data for response so wait for rest of data
50 = Sending test frame
60 = Sending S-frame
70 = Sending StartDT act
80 = Sending StopDT act
100 = End program/close socket
1000 = Close socket (start 2-second timeout)
1001 = Wait for close & abort if timeout
2000 = ARP request/response
2001 = Open Socket
3 Open Count Number of times socket open attempted
4 Close Count Number of times socket closed
5 Connect Count Number of times socket established
6-15 Host IP ASCII string of remote server IP address (10 words)
16 t0 Timeouts Number of t0 timeouts
17 t1 Timeouts Number of t1 timeouts
18 t2 Timeouts Number of t2 timeouts
19 t3 Timeouts Number of t3 timeouts
20 Sequence Errors Number of sequence errors
21 Bad Address Errors Number of bad address errors
22 Length Errors Number of length errors
23 Rx Frame Count Number of frames received on socket
24 Tx Frame Count Number of frames transmitted on socket
25 Cmd Requests Number of commands issued from command list and queue
26 Cmd Responses Number of responses to commands issued from command
list and queue.
27 Cmd Error Count Number of errors recognized when issued from command list
or queue
28 Requests Number of requests from command driver
29 Responses Number of messages received by command driver
30 Errors Sent Number of errors sent by command driver (not used)
31 Errors Received Number of errors received by command driver
32 Configuration Error Configuration error word for client
33 Current Error Current error recognized
34 Last Error Last error recognized
35 Send Number Send sequence number
36 Rec Number Received sequence number
37 Ack Number Last acknowledged sequence number
38 Queue Max Maximum number of queue (k)
39 Queue Threshold Queue threshold before S-Frame sent (w)
40 Rec Packets Number of I-frames received but not acknowledged
41 Queue Now Number of messages in queue
Page 118 of 136 ProSoft Technology, Inc.
March 4, 2013