ProSoft Technology PTQ-104C - Manual (Page 128)

Reference 49TPTQ-104C ♦ 48TQuantum Platform
12TUser Manual 47TIEC 60870-5-104 Client
Test procedure
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
Test procedure
File transfer
(Station-specific parameter, mark "X" if function is used)
File transfer in monitor direction

Transparent file
 Transmission of disturbance data of protection equipment
 Transmission of sequence of events
 Transmission of sequence of recorded analogue values
 File transfer in control direction
 Transparent file
Background scan
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)

Background scan
Definition of time outs
Parameter Default Value Remarks Range
t
0
30 seconds Time-out of connection establishment 1 to 1000 seconds
t
1
15 seconds Time-out of send or test APDUs 1 to 255 seconds
t
2
10 seconds Time-out for acknowledges in case of no data
messages (t
2
< t
1
)
1 to 255 seconds
t
3
20 seconds Time-out for sending test frames in case of a
long idle time 1 to 300 seconds
Maximum range of values for configurable time-outs: accuracy 1 second.
Maximum number of outstanding I format APDUs k and latest acknowledge
APDUs (w)
Parameter Default Value Remarks Range
k 6 APDUs Maximum number of message to hold in queue 1 to 12
w 4 APDUs Threshold value when to send ack 1 to 8
Maximum range of values k: 1 to 32767 (2
15
-1) APDUs, accuracy 1 APDU
Maximum range of values w: 1 to 32767 (2 15 -1) APDUs, accuracy 1 APDU
(Recommendation: w should not exceed two-thirds of k).
B
Page 128 of 136 ProSoft Technology, Inc.
March 4, 2013