ProSoft Technology ILX34-AENWG - Manual (Page 49)

Glossary of Terms PSW-PWD ♦ ProSoft Software
User Manual ProSoft Wireless Designer
ProSoft Technology, Inc.
Page 49 of 91
July 8, 2009
LED
Light-emitting diode.
Line of Sight (LoS)
A clear line from one antenna to another in a long-range wireless network.
Link point
The graphical point next to a radio icon that represents the connection point for
RF communications between radios. An RF connection between two radios is
called an RF Link and is represented as a graphical black line between the
radio’s link points.
M
MAC ID
Media Access Control address. Every 802.11 device has its own MAC address.
This is a unique identifier used to provide security for wireless networks. When a
network uses a MAC table, only the 802.11 radios that have had their MAC
addresses added to the network’s MAC table are able to get on the network.
Master device
Device that is connected to the Master radio.
Mbps
Megabits per second, or millions of bits per second. A measure of bandwidth.
Megahertz
A measure of electromagnetic wave frequency equal to one million hertz. Often
abbreviated as MHz and used to specify the radio frequency used by wireless
devices.
Mesh Networking
Features free standing, non wired network nodes that communicate among one
another and form self-configuring networks, with only one node required to hook
into a wired LAN. The other nodes are simply plugged into an electrical outlet, so
cabling is much less of an issue.
MIC
Message Integrity Check. One of the elements added to the TKIP standard. A
"signature" is added by each radio on each packet it transmits. The signature is
based on the data in the packet, a 64-bit value (key) and the MAC address of the
sender. The MIC allows the receiving radio to verify (check) that the data is not
forged.