ProSoft Technology ILX34-AENWG - Manual (Page 22)

PSW-PWD ♦ ProSoft Software Using ProSoft Wireless Designer
ProSoft Wireless Designer User Manual
Page 22 of 91
ProSoft Technology, Inc.
July 8, 2009
2.5.2 Entering Site Coordinates
ProSoft Wireless Designer uses the site coordinates to calculate the precise
distance between sites. Use the tabs to choose the data entry format compatible
with your GPS (Global Positioning System) device, or enter the known
geographical coordinates for the site.
To enter Site Coordinates
1 Determine the latitude and longitude coordinates for the site, using a GPS
device, or from known coordinates.
2 Right click on a site, and then choose Properties.
3 On the Site Properties (page 30) dialog box, click the Location button to open
the Site Coordinates (page 32) dialog box.
4 Select the tab that best matches the coordinates (Decimal, Degree:Minute, or
Degree:Minute:Second)
5 Enter the site coordinates. Be sure to select the correct North/South and
East/West orientation.
2.6 Viewing Site Properties
The Site Properties (page 30) dialog box shows you all the components and
computed values associated with the current site. Use this dialog box to view or
modify the settings for Antennas, (page 31) Cables, (page 31) Radio (page 33)
and Accessories. (page 32)
To view Site Properties
1 In the Network Diagram view, select the Site to view, and then right-click to
select Properties.
2 In the Site Properties dialog box, click the icons or buttons for each
component to view or modify the selections.
Important: The Antenna, Cables and Accessories in the Site Properties are chosen by ProSoft
Wireless Designer based on the default items selected in the Settings dialog box. You may need to
modify those choices for each site to accommodate the specific requirements for each location.