ProSoft Technology ILX34-AENWG User Manual
Page 18
PSW-PWD ♦ ProSoft Software
Using ProSoft Wireless Designer
ProSoft Wireless Designer
User Manual
Page 18 of 91
ProSoft Technology, Inc.
July 8, 2009
Click the left mouse button in the Diagram area, and fill in the Enter New Site
Data dialog box.
Tip: If you enter the Latitude and Longitude coordinates for each site, ProSoft Wireless Designer
will calculate the link distance automatically. Click the Lat/Long Coordinates button to enter the
coordinates.
Notice that you can enter the coordinates in a variety of ways. Select the tab that
shows the coordinate entry format to use. In the following illustration, the decimal
coordinates were entered from the display on a handheld GPS device placed at
the proposed location for the site. Be sure to specify the correct North/South and
East/West position for your coordinates.