ProSoft Technology MVI71-MCM - Manual (Page 9)

Start Here MVI71-MCM ♦ PLC Platform
Modbus Communication Module
ProSoft Technology, Inc. Page 9 of 111
December 28, 2007
1 Start Here
In This Chapter
¾ System Requirements.............................................................. 9
¾ Package Contents.................................................................. 10
¾ Setting Jumpers ..................................................................... 11
¾ Install the Module in the Rack ................................................ 12
¾ Connect your PC to the Processor......................................... 13
¾ Download the Sample Program to the Processor .................. 14
¾ Connect your PC to the Module ............................................. 17
Installing the MVI71-MCM module requires a reasonable working knowledge of
the Rockwell Automation hardware, the MVI71-MCM Module and the application
in which they will be used.
Caution: It is important that those responsible for implementation can complete
the application without exposing personnel, or equipment, to unsafe or inappropriate
working conditions. Safety, quality and experience are key factors in a successful
installation.
1.1 System Requirements
The MVI71-MCM module requires the following minimum hardware and software
components:
ƒ
Rockwell Automation PLC processor, with compatible power supply and one
free slot in the rack, for the MVI71-MCM module. The module requires
800mA of available power.
ƒ The PLC Processor must provide for at least 64 words of BTR/BTW area,
otherwise the module may not function correctly.
ƒ Rockwell Automation RSLogix 5 programming software.
ƒ Rockwell Automation RSLinx communication software
ƒ Pentium® 100 MHz minimum. Pentium III 700 MHz (or better) recommended
ƒ Supported operating systems:
o
Microsoft Windows XP
o
Microsoft Windows 2000
o
Microsoft Windows NT v4.0 with Service Pack 3 or greater
o
Microsoft Windows ME
o
Microsoft Windows 98