Protocol serial 3964r menu, Redisplaying the menu, Viewing version information – ProSoft Technology MVI56-S3964R User Manual
Page 46: Returning to the main menu
MVI56-S3964RT ♦ TControlLogix PlatformT
Diagnostics and Troubleshooting
TSiemens 3964R ProtocolT
Page 46 of 78
ProSoft Technology, Inc.
Use this command to display the configuration and statistics of the backplane
data transfer operations between the module and the processor. The information
on this screen can help determine if there are communication problems between
the processor and the module.
Tip: Repeat this command at one-second intervals to determine the number of blocks transferred
each second
4.1.6 Protocol Serial 3964R Menu
Press [0] or [1] to view protocol serial information for ports 1 and 2, respectively.
Use this command to view a variety of error and status screens for the port.
Press [?] to view a list of commands available on this menu.
M = Main Menu
0 / 1 = Protocol_Serial Menu
S = Serial Port
V = Version Information
Opens the Serial Port menu
Displays version information screen
M = Main Menu
Goes up one level to main menu
? = Display Menu
Redisplays (refreshes) this menu
E = Error/Status Information
Opens the Command List menu
See Serial Port Menu section
See Command List Menu section
C = Configuration Information
Displays configuration information
screen
Redisplaying the Menu
Press [?] to display the current menu. Use this command when you are looking
at a screen of data, and want to view the menu choices available to you.
Viewing Version Information
Press [V] to view Version information for the module.
Use this command to view the current version of the software for the module, as
well as other important values. You may be asked to provide this information
when calling for technical support on the product.
Values at the bottom of the display are important in determining module
operation. The Program Scan Counter value is incremented each time a
module's program cycle is complete.
Tip: Repeat this command at one-second intervals to determine the frequency of program
execution.
Returning to the Main Menu
Press [M] to return to the Main Menu.
April 17, 2008