Select the slot number for the module, To change the slot number – ProSoft Technology MVI56-S3964R User Manual
Page 16
MVI56-S3964RT ♦ TControlLogix PlatformT
Start Here
TSiemens 3964R ProtocolT
Page 16 of 78
ProSoft Technology, Inc.
5
On the Connected To Go Online dialog box, click the General tab. This tab
shows information about the processor, including the Revision (firmware)
version. In the following illustration, the firmware version is 11.32
1.7.2 Select the Slot Number for the Module
The sample application is for a module installed in Slot 1 in a ControlLogix rack.
The ladder logic uses the slot number to identify the module. If you are installing
the module in a different slot, you must update the ladder logic so that program
tags and variables are correct, and do not conflict with other modules in the rack.
To change the slot number
1
In the Controller Organization list, select the module [1] 1756-MODULE
MVI56, and then click the right mouse button to open a shortcut menu.
2
On the shortcut menu, choose Properties. This action opens the Module
Properties dialog box.
April 17, 2008