ProSoft Technology MVI56-S3964R - Manual (Page 32)

MVI56-S3964RT ♦ TControlLogix PlatformT Installing and Configuring the Module
TSiemens 3964R ProtocolT
Page 32 of 78 ProSoft Technology, Inc.
This parameter specifies whether bytes should be swapped. 0 = No data byte
swapping, 1 = Data byte swapping.
2.5.10 Priority
0 or 1
This parameter specifies whether the data is high priority or low priority. 0 = High
priority, 1 = Low Priority.
2.5.11 Protocol
0 or 1
0=3964 RK512, 1=3964
2.5.12 ACK Delay
Number of milliseconds to wait for ACK. The default is 1000 ms.
2.5.13 Setup Attempts
Number of times to try to connect to CP (Default 6)
2.5.14 Transmit Attempts
Number of times to try to transmit to CP (Default 6)
2.6 Download the Project to the Module
In order for the module to use the settings you configured, you must download
(copy) the updated Project file from your PC to the module.
To Download the Project File
1 In the tree view in ProSoft Configuration Builder, click once to select the
MVI56-S3964R module.
2 Open the Project menu, and then choose Module / Download. The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid com port, the following dialog box will open.
April 17, 2008