PLANET IKVM-16010 - Manual (Page 33)

8/16-Port IP KVM Switch
• Video Settings
Opens a panel for changing the IKVM-8010 / IKVM-16010 video settings.
Brightness--Controls the brightness of the picture.
Contrast--Controls the contrast of the picture.
Clock--Defines the horizontal frequency for a video line and depends on the video mode. Different
video card types may require different values here. The default settings in conjuction with the auto
adjustment procedure should be adequate for all common configurations. If the picture quality is still
bad after auto adjustment, you may try to change this setting together with the sampling phase to
achieve a better quality.
Phase--Defines the phase for video sampling, used to control the display quality together with the
setting for sampling clock.
Horizontal Position--Use the left and right buttons to move the picture in horizontal direction while this
option is selected.
Vertical Position--Use the left and right buttons to move the picture in vertical direction while this option
is selected.
Reset this Mode--Reset mode specific settings to the factory-made defaults.
Reset all Modes--Reset all settings to the factory-made defaults.
Save Changes--Save changes permanently.
Undo Changes--Restore last settings.
33 / 38