1 cat5 transmitter module, 2 cat5 kvm receiver (r-box), Cat5 transmitter module – PLANET IKVM-16010 User Manual
Page 15: Cat5 kvm receiver (r-box)
8/16-Port IP KVM Switch
IP-Module
Serial Power Control
The IP Module comes with a serial port for connecting to any serial device, such as serial PDU (Power
Distribution Unit) to provide remote power control, such as power on, power off, and power cycle for the
connected computers/servers.
2.4.1 CAT5 Transmitter Module
CAT5 Remote Console
Installation: Power off the KVM switch firstly. Remove the cover of the add-on slot, slide in the CAT5
transmitter module and make sure the module is fully inserted into the slot.
To extending your console up to 1000 feet away by connecting the CAT5 cable to the R-Box in the remote
end.
Please refer to the “CAT5 Extender User Manual” for details.
2.4.2 CAT5 KVM Receiver (R-Box)
Please refer to the “CAT5 Extender User Manual” for details.
15 / 38