5 power up sequence, Power up sequence – PLANET IKVM-16010 User Manual
Page 16
8/16-Port IP KVM Switch
2.5 Power Up Sequence
Double check whether all cables/connectors are properly connected. You can check the color of keyboard
and mouse connectors to ensure the connectors and cables are connected correctly.
The recommended Power Up sequence is as follows: Monitor, KVM Switch, finally the Computers.
Verify that all servers connected to the KVM Switch are powered on. If any connected servers have not been
powered on, it is okay to do so at this time (servers can be powered on simultaneously). The KVM Switch
emulates both a mouse and keyboard on each port and allows your server to boot normally.
When power on the KVM switch, you will see the SELECT LED of Port 1 lights up, and hear a beep sound. If
you encounter an error, check your cable connections for that server and reboot. If the problem persists,
please refer to the chapter “Troubleshooting” in this User Manual.
16 / 38