PLANET IKVM-16010 - Manual (Page 10)

8/16-Port IP KVM Switch
2 Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
2.1 Desktop or Rack Mount
The IKVM-8010 / IKVM-16010 switch unit can be placed on desktop or rack mounted.
Desktop
Stick the self-adhesive footpads that come with the package to the unit’s bottom panel at the four corners. To
install footpads, please turn upside down; and refer to the following instructions properly for installing the
footpads.
Footpads Installation
Rack Mounting
The IKVM-8010 / IKVM-16010 switch unit can be mounted on 19”/1U rack:
1. Screw the mounting brackets into the sides of the unit at the front, as shown in the diagram below.
Take note of the length of your cables so that your computers, IKVM-8010/16010 Switch, keyboard,
mouse and monitor are distanced properly.
Rack Mount Installation -1
2. Slide the unit into the rack and secure it to the rack.
10 / 38