PLANET ISG-101 - Manual (Page 9)

PLANET ISG-101 Internet Subscriber Gateway
4-1-1 Login
ISG-101 Internet Subscriber Gateway
(c) 2002 Copyright PLANET Technologies Inc. All Rights Reserved.
Version 1.02.11
Username:
Password:
Figure 4-2 Login menu display
The default Username is “admin”. The default Password is “password”.
User can change password setting after accessing the ISG-101 system.
Notice: The administrator can change the password via the utilities item.
4-1-2 Main Menu
Main Menu
1) System Configuration
2) Status
3) Utilities
4) Restart
5) Logout
6) Factory Setting
Figure 4-3 Main Menu Screen
1) System Configuration: Including ISG-101 system basic parameter setting.
2) Status: Display ISG-101 system basic status.
3) Utilities: Including firmware and configuration upload/download and change password
capability.
4) Restart: Restart the ISG-101 system
5) Logout: Logout the ISG-101 serial session
6) Factory Setting: Erase all setting and back to the original factory setting
Enter a numeric that you need between 1~6 and press ‘Enter’ to the subdirectory.
4-1-3 System Configuration
System Configuration
System Name : ISG-101
Console Baud Rate : 9600
Auto Logout Timer : 10
WAN Configuration
IP Address : 210.1.1.2
Subnet Mask : 255.255.255.0
Gateway : 210.1.1.1
Web Server Port : 80
DHCP Configuration
DHCP Service? (D/R/S) : D
E-Mail Server IP Address :
Primary DNS IP Address :
Secondary DNS IP Address :
Enter system name.
Figure 4-4 System Configuration Screen
1) System Name: You can assign a name to this unit. Up to 32 characters are allowed.
2) Console Baud Rate: The Console Baud Rate is only relative to connection of console. There
are three different rates: 9600, 19200, or 38400.
3) Auto Logout Timer: Enter 0 for never time out or 1 to 60 for timeout minutes.
4) WAN Configuration: Enter WAN port IP Address Configuration such like IP address, subnet
mask and gateway. The Web server port default is 80, however some user may set up the
ISG-101 under the NAT network. The administrator has to set the special Web server port so
that ISG-101 can be remote access under NAT network.
Notice: The web server port allowed range is from 8000 to 8099 if administrator wants to remote
access under NAT Network. For access the ISG-101 system under NAT, please tab the
“http://WAN Port IP Address: Port Number”. The function of remote access ISG-101
system will be released after V1.00.02 version. For the release news please check the
PLANET Web Site or PLANET Support Team.
18 19