PLANET ISG-101 - Manual (Page 22)

PLANET ISG-101 Internet Subscriber Gateway
4-2-18 Firmware Upgrade
Figure 4-33 Web Configurator Firmware Upgrade Screen
The ISG-101 uses TFTP Download to upgrade firmware. User needs to specify TFTP server IP
address and the filename that you wish to download.
TFTP server IP Address: Enter the TFTP server IP address.
File Name: Enter the Download file name.
Notice: How to make a TFTP download please refer to the 4-1-6
4-2-19 Change Password
Figure 4-34 Web Configurator Change Password Screen
The Password Change screen allows you to change an existing password.
Notice: A permitted password string is from 8 to 20. The characters are limited by alphabets and
numerals.
4-2-20 Restart
Figure 4-35 Web Configurator Restart Screen
Press the “Restart” button and the system will be restart after 30 seconds. Or press the “cancel”
button return to the main menu.
4-2-21 Logout
Figure 4-36 Web Configurator Logout Screen
Press the “Logout” button and the System would logout to the Login page. Or press Cancel to
return to the main menu.
4-3 Subscriber Applications
The subscribers that connect under the ISG-101 can surf the Internet without change any
network configuration. Just plug the hardware connection and enter the Username and
Password, which was provided by the Local Service Provider.
Notice: If the Service Provider set the Subscriber Control as Disable then the subscribers need
no username and password. See also 4-2-6.
44 45