PLANET ISG-101 - Manual (Page 13)

PLANET ISG-101 Internet Subscriber Gateway
4-2-2 Main Menu
Figure 4-12 Web-based Configuator Main Menu Screen
After a valid username and password have been provided, the ISG-101 Web-based
Configurator displays the Main Menu available.
1) Configuration: Including ISG-101 system parameter setting.
2) Status: Display ISG-101 status.
3) Utilities: Including firmware and configuration change password capability.
4) Restart: Restart the ISG-101 system form the remote site.
5) Logout: Logout the ISG-101 Web Configurator session.
4-2-3 Configuration Menu
Figure 4-13 Web-based Configuator Configuration Menu Screen
1) System: Define the ISG-101 System configuration.
2) Subscriber Management: Manage subscribers information such like management type
(using RADIUS or internal accounting management), customize login page, subscriber
logout timer etc.
3) Advertisement Link: Send the plus advertisement link to the subscribers when the subscriber
starts the ISG-101 service.
4) Pass Through IP & MAC: allow administrator to set some special devices pass through the
ISG-101 system. Because some network devices might be constructed under the Internet
Subscriber Gateway. However these devices needn’t be checked and authorized. The
ISG-101 provides a pass through table and the administrator can control which devices can
be pass through with authentication.
5) Virtual Server Table: Enables administrator to expose WWW, FTP and other services on your
LAN to be accessible to Internet users under the NAT Network.
4-2-4 System Configuration
Figure 4-14 Web-based Configuator System Configuration Screen
1) System Name: You can assign a name to this unit. Up to 32 characters are allowed.
2) Console Baud Rate: The Console Baud Rate is only relative to connection of console. There
are three different rates: 9600, 19200, or 38400.
26 27