PLANET WNRT-320GS - Manual (Page 50)

User’s Manual of WNRT-320GS
-44-
Object Description
Server IP Address
Enter the L2TP Server IP address in dotted-decimal notation provided by
your ISP.
User Name Enter the User Name provided by your ISP. This field is case-sensitive.
Password Enter the Password provided by your ISP. This field is case-sensitive.
Select the corresponding method to obtain an IP address from your ISP.
IP Address Enter the IP address in dotted-decimal notation provided
by your ISP.
Subnet Mask Enter the subnet mask in dotted-decimal notation
provided by your ISP.
Gateway Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
DNS1 Enter the DNS server IP address provided by your ISP,
or you can specify your preferred DNS server IP
address.
Wan Type
DNS2 You can enter the IP address of another DNS server as
a backup. DNS 2 server will be used when the DNS 1
server fails.
Connection Type
Select the connection type Continuous, Connect on Demand or Manual
from the drop-down menu. If selecting Manual, the user can click Connect
button to make a connection.
Idle Time
It represents that the device will idle after the minutes you set. The time
must be set between 1~1000 minutes. Default value of idle time is 5
minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
MTU Size
The default MTU (Maximum Transmission Unit) value is 1460 Bytes. It is
not recommended that you change the default MTU Size unless required
by your ISP.
Table 4-13