Hardware installation – PLANET WNRT-320GS User Manual

Page 21

User’s Manual of WNRT-320GS

-15-

Figure 3-7

3.4. Hardware Installation

Please follow the instructions below to build the wireless network connection between WNRT-320GS
and your computers.

Do not dispose of the battery in a fire or any other high-temperature place as

it may explode. Before you start using the WNRT-320GS, please follow the

procedures below to install and charge the battery first.

Step 1: Remove the battery cover, and insert the attached battery into the slot. Then replace the

cover back.

Step 2: Charge the battery by the attached power adapter and USB cable. The red

LED will be

lit up.

Step 3: The battery needs to be charged for 8 hours at the first time. When the battery is fully

charged, the red

LED will be off.