PLANET WNRT-320GS - Manual (Page 38)

User’s Manual of WNRT-320GS
-32-
parameters of the AP you want to connect via WDS.
Show Statics Click the “Show Statics” button to show the WDS AP.
Current WDS AP List
You can select some MAC address of the AP, and click the “Delete
Selected” button to delete it.
Table 4-5
4.4.6. Site Survey
Choose menu “Wireless Æ Site Survey” to scan the available local AP. If any Access Point is found,
you could choose any one to connect with manually when the Client Mode is enabled.
Figure 4-14 Wireless Site Survey
4.4.7. WPS
Choose menu “Wireless Æ WPS”, and you can configure the setting for WPS (Wi-Fi Protected Setup).
After the configuration, please click the “Apply Changes” button to save the settings.