PLANET WNRT-320GS - Manual (Page 49)

User’s Manual of WNRT-320GS
-43-
DNS1 Enter the DNS server IP address provided by your
ISP, or you can specify your preferred DNS server
IP address.
DNS2 You can enter the IP address of another DNS
server as a backup. DNS 2 server will be used
when the DNS 1 server fails.
Connection Type
Select the connection type Continuous, Connect on Demand or
Manual from the drop-down menu. If selecting Manual, the user can
click Connect button to make a connection.
Idle Time
It represents that the device will idle after the minutes you set. The
time must be set between 1~1000 minutes. Default value of idle time is
5 minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
MTU Size
The default MTU (Maximum Transmission Unit) value is 1460 Bytes. It
is not recommended that you change the default MTU Size unless
required by your ISP.
Table 4-12
L2TP
If your ISP provides L2TP connection, please select L2TP option and enter the correct parameters.
Please refer to the instructions below
Figure 4-25 WAN Access Type – L2TP