PLANET WNRT-320GS - Manual (Page 46)

User’s Manual of WNRT-320GS
-40-
PPPoE
If your ISP provides a PPPoE connection, please select PPPoE option. The user has to setup the user
name and password provided by your ISP. Please refer to the instructions below
Figure 4-22 WAN Access Type – PPPoE
Object Description
User Name Enter the User Name provided by your ISP. This field is case-sensitive.
Password Enter the Password provided by your ISP. This field is case-sensitive.
Service Name Enter the Internet service provider name in this field.
Connection Type
Select the connection type Continuous, Connect on Demand or
Manual from the drop-down menu. If selecting Manual, the user can
click Connect button to make a connection.
Idle Time
It represents that the device will idle after the minutes you set. The
time must be set between 1~1000 minutes. Default value of idle time is
5 minutes. This function will be available when the Connection Type is
selected to Connect on Demand.
MTU Size
The default MTU (Maximum Transmission Unit) value is 1452 Bytes. It
is not recommended that you change the default MTU Size unless
required by your ISP.
Table 4-10