PLANET WNAP-7350 User Manual

Page 97

User Manual of WNAP-7350

-90-

5) The

following

TCP/IP Properties window will display and the IP Address tab is open on this window

by default.

Now you can configure the TCP/IP protocol below:



Setting IP address manually

Select Use the following IP address radio button.

If the AP's LAN IP address is 192.168.1.1, type in IP address 192.168.1.x (x is from 2 to 254), and Subnet

mask 255.255.255.0.

Select Use the following DNS server addresses radio button. In the Preferred DNS Server field you can

type the DNS server IP address which has been provided by your ISP

Figure B-4

Now click OK to keep your settings.

This manual is related to the following products: